Nmcli bridge Dummy Interface

# Modul laden und persistent machen

• sudo modprobe dummy
• echo "dummy" | sudo tee /etc/modules-load.d/dummy.conf

#Dummy-Device erstellen

• sudo ip link add dummy0 type dummy
• sudo ip link set dummy0 up

# Netzwerkbrücke erstellen

• sudo nmcli con add type bridge autoconnect yes con-name br1 ifname br1
• sudo nmcli con modify br1 ipv4.addresses 10.0.20.1/24 ipv4.method manual
• sudo nmcli con up br1

#Dummy-Device zur Brücke hinzufügen

• sudo nmcli con add type bridge-slave autoconnect yes con-name br1-dummy0 ifname dummy0 master br1
• sudo nmcli con up br1-dummy0