Squid from the scratch: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) |
Thomas (Diskussion | Beiträge) |
||
Zeile 46: | Zeile 46: | ||
=Lan und DMZ freischalten= | =Lan und DMZ freischalten= | ||
==acl bilden== | ==acl bilden== | ||
− | acl src | + | acl lan src 172.16.150.0/24 |
− | acl src | + | acl dmz src 10.40.115.0/24 |
+ | |||
==acl anwenden(Reihenfolge ist entscheidend)== | ==acl anwenden(Reihenfolge ist entscheidend)== | ||
http_access allow lan | http_access allow lan |
Version vom 20. März 2017, 14:18 Uhr
Installation
- apt-get install squid
Konfiguration
- cd /etc/squid
- mv squid.conf squid.conf.org
Reduzieren auf das notwendige
- grep "^[^#]" squid.conf.org > squid.conf
Die Konfigurationsdatei
cat /etc/squid/squid.conf
#Accesslisten acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT #HTTP Access http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost manager http_access deny manager http_access allow localhost http_access deny all #Port http_port 3128 #Wenn Squid abstürtz wird hier ein Abbild hingeschrieben coredump_dir /var/spool/squid #Caching Verhalten refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880 refresh_pattern . 0 20% 4320
Lan und DMZ freischalten
acl bilden
acl lan src 172.16.150.0/24 acl dmz src 10.40.115.0/24
acl anwenden(Reihenfolge ist entscheidend)
http_access allow lan http_access allow dmz
Squid handling
Squid stop
- systemctl stop squid
Squid start
- systemctl start squid
Squid restart
- systemctl restart squid
Squid reload
- systemctl reload squid
Squid status
- systemctl status squid
Squidport checken
- netstat -ltnp | grep 3128