Nortel 5510 Basics
Zugriff
- Zugriff über Telnet auf Port 23
- telnet <IP oder FQDN>
Konfigurations-Menü
Zugriff auf die Konsole
enable
- 5510-24T>enable
- 5510-24T#
show-Befehle
running-config
- show running-config
5510-24T#show running-config ! Embedded ASCII Configuration Generator Script ! Model = Ethernet Routing Switch 5510-24T ! Software version = v6.2.0.008 ! ! Displaying only parameters different to default !================================================ enable configure terminal ... ... ...
interfaces
- show interfaces
Status Auto Flow Port Trunk Admin Oper Link LinkTrap Negotiation Speed Duplex Control ---- ----- ------- ---- ---- -------- ----------- -------- ------ ------- 1 Enable Down Down Enabled Enabled 2 Enable Down Down Enabled Enabled 3 Enable Down Down Enabled Enabled 4 Enable Down Down Enabled Enabled 5 Enable Down Down Enabled Enabled ... ... ...
vlan
- show vlan
Id Name Type Protocol PID Active IVL/SVL Mgmt --- -------------------- -------- ---------------- -------- ------ ------- ---- 1 VLAN #1 Port None 0x0000 Yes IVL Yes Port Members: 1-6 2 VLAN #2 Port None 0x0000 Yes IVL No Port Members: 7-12
ip route
- show ip route
===============================================================================
Ip Route
===============================================================================
DST MASK NEXT COST VLAN PORT PROT TYPE PRF
-------------------------------------------------------------------------------
Total Routes: 0
-------------------------------------------------------------------------------
TYPE Legend:
I=Indirect Route, D=Direct Route, A=Alternative Route, B=Best Route, E=Ecmp Rou
te, U=Unresolved Route, N=Not in HW