IPSec Strongswan mit Linux Beispiel: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
(Die Seite wurde neu angelegt: „== Installation == * '''apt update''' * '''apt install strongswan strongswan-swanctl''' == Voraussetzungen == * Beide Systeme: Linux mit strongSwan und VICI-Un…“) |
|||
| Zeile 10: | Zeile 10: | ||
! Einstellung !! links !! rechts | ! Einstellung !! links !! rechts | ||
|- | |- | ||
| − | | '''IP Address''' || 192.168. | + | | '''IP Address''' || 192.168.5.193 || 192.168.5.194 |
|- | |- | ||
| '''Internes Netz''' || 172.26.193.0/24|| 172.26.194.0/24 | | '''Internes Netz''' || 172.26.193.0/24|| 172.26.194.0/24 | ||
Version vom 3. August 2026, 08:52 Uhr
Installation
- apt update
- apt install strongswan strongswan-swanctl
Voraussetzungen
- Beide Systeme: Linux mit strongSwan und VICI-Unterstützung (swanctl)
- Nur VICI (swanctl), keine ipsec.conf oder ipsec.secrets
- XX eigene Seite, gegenüberliegende Seite YY
Szenario
| Einstellung | links | rechts |
|---|---|---|
| IP Address | 192.168.5.193 | 192.168.5.194 |
| Internes Netz | 172.26.193.0/24 | 172.26.194.0/24 |
| Pre-Shared Key (PSK) | 123Start$ | |
| Phase 1 | AES256 – SHA256 – DH16 | |
| Phase 2 | AES256 – SHA256 – DH16 | |